Banner with eyelets

vertical_align_bottom Data sheet
vertical_align_bottom PDF Template vertical_align_bottom Instructions
  1. Choose the type of fabric
    Flag Fabric
    Waterproof Fabric
  2. Choose the distance between eyelets
    Eyelets every 50CM
    Eyelets every 100CM
  3. Enter the measurements
    • meters
    • meters
    Text sizes overflow
  4. Quantity
  5. Choose an option for attaching your design
    Upload your design
    vertical_align_bottom PDF Template vertical_align_bottom Instructions
  6. Prices (free shipping) (transporte gratis)

    Prices available exclusively for registered distributors

Banner with eyelets

Rectangular banner made of polyester fabric or waterproof fabric. It has a perimeter reinforcement tape with eyelets every 50 cm or every 100 cm (your choice), which facilitates its installation and knotting on multiple surfaces. Designed to be made horizontally, you can customise it vertically by selecting the width and height according to the measurements you need. The textile surface of the banner is printable with colours and/or designs of your choice.

Due to its composition, it can be used both indoors and outdoors, is colourfast and washable. 

Content

  • Banner, made of 100% polyester fabric of 115 g/m², or waterproof fabric of 180 g/m² or 260 g/m² blackback fabric, with different sizes between eyelets.
  • Pole and base not included.

Banner Dimensions

Banner with customisable measurements. The eyelets are 1 cm in diameter, you can choose the distance between the eyelets, every 50 cm or every 100 cm.

The waterproof fabric banner will have splices if you choose a width and length greater than 2.15 metres. While if you choose the banner fabric, it will have splices if you choose a width and length greater than 3,10 metres.

Uses of the eyelet banner

Among the most suitable uses and locations for the advertising display of banners are the following: 

  • Building facades.
  • Marketing campaigns.
  • Welcome celebrations.
  • Fairs, exhibitions and congresses.
  • Scaffolding for construction sites.
  • Billboards.

* This product can feature personalised labels.

Features

Description

Materials

- 180 g/m² waterproof fabric.

The banner in waterproof fabric will have seams if you choose a width and height greater than 2.15 metres.

- 100% polyester fabric, 115 g/m². With the following properties:

- Weaving: 50% weft and 50% warp.

- 3-thread mesh.

Metal eyelets.

The banner made from flag fabric and 260 g/m² Blackback fabric will have seams if you choose a width and height greater than 3.15 metres.

Banner Finishing and Stitching

The banner includes a reinforcement tape around its perimeter and eyelets every 50 cm or 100 cm to facilitate fastening.

In addition, the banner has the following finish:

- Double-stitched sewing.

- Double hem, 10 mm wide.

- Double symmetrical stitching 1.5 mm from the 7 mm edges.

- Stitch length: 5 mm.

Dimensions
  • Custom width and height. The total area cannot exceed 144 square metres.
  • Selectable eyelet spacing: 50 cm or 100 cm.
  • Eyelets with an internal diameter of 1 cm.

Important: Due to the high temperatures involved in the sublimation process, the flag fabric may experience shrinkage of up to ±5%.

Colour and Design

Customisable textile colours and designs.

Gold-coloured eyelets.

Printing

115 g/m² and 260 g/m² - Inkjet sublimation printing in CMYK colours (four-colour process), single-sided, with approximately 96% colour penetration using official inks.

180 g/m² - UV printing with curing and drying, single-sided, using official inks.

Weight

According to dimensions.

Uses

Indoor and outdoor use.